MastaTANK module

mastaTANK™ STM Quad Module – 600x600x1350mm

Product Code: STMTANK-QUAD

mastaTANK STM stormwater Modules are suited to any subsurface infiltration, retention or detention Stormwater applications. Manufactured using recycled materials, the STM Tank Modules are lightweight, engineered design, structural component developed through research & development.

Add to Products EnquiryAvailable SizesSpecificationsApplicationsResources

Description

mastaTANK™ STM stormwater Modules are suited to any subsurface infiltration, retention or detention Stormwater applications. Manufactured using recycled materials, the STM Tank Modules are lightweight, engineered design, structural component developed through research & development. It is ideally used for the construction of underground Infiltration, Reuse, Detention Tanks, Grass Swale, Subsurface interception channels, Septic Leach Drains and light weight void fillers for roof gardens and planter boxes applications.

mastaTANK™ STM stormwater Module system supersedes traditional gravel and pipe based systems by far. The system provides a void space ratio of over 95% compared to 30% in typical gravel and pipe based systems. Consequently, the mastaTANK™ STM stormwater offers a smaller footprint for the same storage volume, significantly saving the amount of excavation, soil transport, importing clean aggregate and thus reducing earthworks related installation costs, and causes minimum site disruption.

All Options Available

STMTANK-SINGLEmastaTANK™ STM Single Module – 600x600x360mm
STMTANK-DOUBLEmastaTANK™ STM Double Module – 600x600x690mm
STMTANK-TRIPLEmastaTANK™ STM Triple Module – 600x600x1020mm
STMTANK-QUADmastaTANK™ STM Quad Module – 600x600x1350mm

Specifications

Applications

  • Trafficable Online Detention System
  • Trafficable Offline Detention System
  • Retention System
  • Stormwater Tanks
  • Infiltration Tanks
  • Modular Onsite Detention System (OSD)

Resources

raymond chow profile picture

Meet the Team

Raymond Chow has been involved with the geosynthetics industry for over 15 years. Graduating with a First Class Honours degree in Civil Engineering at the University of Sydney, Raymond specialiSes in retaining wall designs, soft ground improvement, channel and slope protection, and on-site storm water management.

Raymond has been on various technical committees addressing geosynthetics, including testing, specification and durability issues.

Join our next session by emailing us at technical@polyfabrics.com.au

Close Panel

Products Enquiry

No item.
Go and add products