concrete composite lining system
needle punched lining system
concrete matting lining system

mastaTEX® Concrete 40MPA Roll 10mm – 2.5m x 20m

Product Code: MTC40-10-2.5-20

mastaTEX® Concrete is a needle punched composite, consisting of concrete-sand mix, embedded and fixed between two layers of geo-textile.

Add to Products EnquiryAvailable SizesSpecificationsApplicationsResources

Description

mastaTEX® Concrete Roll 10mm – 2.5m is a needle punched composite, consisting of concrete-sand mix, embedded and fixed between two layers of geo-textile. It is much faster and cheaper to install than conventional materials, and our strict quality control of raw materials makes the finished product fail-proof.

It provides a substrate for direct applications of a thin protective layer of regular concrete, which may be used in various weather conditions. The fabric is fastened to an outer part with nails, which provides a solid water-resistant surface stabilisation, further braced thanks to internal reinforcing fibres.

All Options Available

MTC40-10-2.5-20mastaTEX® Concrete 40MPA Roll 10mm – 2.5m x 20m
MTC40-10-5-20mastaTEX® Concrete 40MPA Roll 10mm – 5m x 20m

Specifications

Applications

  • Embankments
  • Replacing shotcrete
  • Bund lining
  • Slope stabilisation
  • Mattress spillways
  • Trenches/swale drains

Resources

  • mastaTEX® Concrete 40MPA Roll Product Spec SheetDownload
  • mastaTEX® Concrete 40MPA Roll Installation GuideDownload
  • mastaTEX® Concrete 40MPA Roll Hydration GuidelinesDownload
  • Latest CatalogueDownload
raymond chow profile picture

Meet the Team

Raymond Chow has been involved with the geosynthetics industry for over 15 years. Graduating with a First Class Honours degree in Civil Engineering at the University of Sydney, Raymond specialiSes in retaining wall designs, soft ground improvement, channel and slope protection, and on-site storm water management.

Raymond has been on various technical committees addressing geosynthetics, including testing, specification and durability issues.

Join our next session by emailing us at technical@polyfabrics.com.au

Close Panel

Products Enquiry

No item.
Go and add products