TERRAM TurfProtecta

Product Code: TURFPROH-2-20

Terram TurfProtecta™ is an extruded polyethylene mesh. Available in two grades, standard and heavy to suit multiple applications. A lightweight polyethylene mesh, used to reinforce grassed areas.

Description

Grass & Ground Reinforcement

TERRAM TurfProtecta is an extruded polyethylene mesh which is tough, flexible and long lasting. Supplied in two grades (Standard and Heavy) depending on the application.

This product can be effectively employed over stable ground by simply unrolling and fixing adjacent and successive lengths. Its lightweight polyethylene mesh is used to reinforce grassed areas intended for very occasional/infrequent light vehicular or pedestrian use, and which are prone to wear and smearing.

The standard grade is suitable for:

  • Wheelchair access routes
  • Paths
  • Pedestrian areas

The heavy grade is suitable for:

  • Occasional-use car parks
  • Access routes

Benrefits

TERRAM TurfProtecta mesh is simple to install. The sward grows through the mesh apertures and knits with the filaments to create a strong, discreetly reinforced surface which is capable of withstanding vehicle loads, limiting damage and helping to reduce compaction.

The grass can be mown, rolled and fertilised as usual during this period. The mesh soon becomes unobtrusive. TERRAM TurfProtecta mesh can also be installed onto newly-landscaped areas and seeded as required.

It is strongly advised that installation is carried out during the growing season to allow the sward to knit with the mesh prior to allowing traffic to use the area. This would normally be after a few weeks during the growing season. Immediate use could restrict growth and limit the effectiveness of the installation.

Specifications

Applications

  • Paths yy Pedestrian areas
  • Wheelchair access routes
  • Occasional-use car parks
  • Access routes

Resources

Product Spec Sheet

Download

Latest Catalogue

Download

Description

Grass & Ground Reinforcement

TERRAM TurfProtecta is an extruded polyethylene mesh which is tough, flexible and long lasting. Supplied in two grades (Standard and Heavy) depending on the application.

This product can be effectively employed over stable ground by simply unrolling and fixing adjacent and successive lengths. Its lightweight polyethylene mesh is used to reinforce grassed areas intended for very occasional/infrequent light vehicular or pedestrian use, and which are prone to wear and smearing.

The standard grade is suitable for:

  • Wheelchair access routes
  • Paths
  • Pedestrian areas

The heavy grade is suitable for:

  • Occasional-use car parks
  • Access routes

Benrefits

TERRAM TurfProtecta mesh is simple to install. The sward grows through the mesh apertures and knits with the filaments to create a strong, discreetly reinforced surface which is capable of withstanding vehicle loads, limiting damage and helping to reduce compaction.

The grass can be mown, rolled and fertilised as usual during this period. The mesh soon becomes unobtrusive. TERRAM TurfProtecta mesh can also be installed onto newly-landscaped areas and seeded as required.

It is strongly advised that installation is carried out during the growing season to allow the sward to knit with the mesh prior to allowing traffic to use the area. This would normally be after a few weeks during the growing season. Immediate use could restrict growth and limit the effectiveness of the installation.

Applications

Raymond Chow has been involved with the geosynthetics industry for over 15 years. Graduating with a First Class Honours degree in Civil Engineering at the University of Sydney, Raymond specializes in retaining wall designs, soft ground improvement, channel and slope protection, and on-site storm water management.

Raymond has been on various technical committees addressing geosynthetics, including testing, specification and durability issues.

Join our next session by emailing us at technical@polyfabrics.com.au
An informative blog post on choosing the right Geogrid
There is a range of different geogrids available on the market, each suitable for different applications.
A fast and cost-effective Geosynthetic solution for the newly opened Jindabyne ski ramp and airbag jump.

HDPE Hydroliner®

Owned and managed by Sydney Water, Johnstons Creek is a concrete stormwater channel constructed in 1898 and one of Sydney’s earliest purpose-built stormwater drains. This project involves the naturalisation of the creek, located near Glebe in Sydney’s inner west.

HDPE Hydroliner®

Owned and managed by Sydney Water, Johnstons Creek is a concrete stormwater channel constructed in 1898 and one of Sydney’s earliest purpose-built stormwater drains. This project involves the naturalisation of the creek, located near Glebe in Sydney’s inner west.

HDPE Hydroliner®

Owned and managed by Sydney Water, Johnstons Creek is a concrete stormwater channel constructed in 1898 and one of Sydney’s earliest purpose-built stormwater drains. This project involves the naturalisation of the creek, located near Glebe in Sydney’s inner west.

Product Enquiry