mastaTEX® (PET) Non-Woven 34 - 4m x 150m

Product Code: PF34-4-150

mastaTEX® (PET) Non-Woven needle-punched geotextile, made from polyester, recommended for pavement stabilisation, subgrade/subsoil separation, slope stabilisation and liner protection.

Description

mastaTEX® F is a non-woven needle-punched geotextile made from polyester, providing separation, filtration, protection or reinforcement functions in engineering projects. It enhances the performance and design life of granular layers by providing the filtration and separation functions.

mastaTEX® provides specific advice and recommendations in construction through specialist laboratories and technical support.

mastaTEX® F Range is manufactured in accordance to ISO 9001:2008.

Benefits

  • Cost-Effective: mastaTEX® is often the most cost effective solution to engineering problems including cracked roads, weak soil, liquid and gas leaks from landfill sites
  • UV-resistant: the natural UV resistance of polyester ensures the material can withstand the harsh Australian environment
  • Superior Technical Performance: mastaTEX® F range nonwoven geotextiles provide superior technical performance. Due to high levels of elongation, the product will adapt to unforeseeable deformations within the sub-base reducing the risk of damage during installation
  • Polyfabrics can provide specific technical advice and recommendations for mastaTEX® F usage in construction.

    Prevents Intermixing of Granular Materials & Soils

    mastaTEX® F Range geotextiles provide an effective solution when constructing a stable granular layer over soft foundation soils. When stone is placed directly on a soft subgrade, the imposed load often causes intermixing of two layers. This results in contamination of the stone layer and a resulting loss in bearing strength, surface rutting and deformation at the sub-base/subgrade interface.

    Prevents the Ingress of Fines into Drainage Media

    Whether it’s a granular drain or a Geosynthetic alternative such as an open TerraDrain unit, mastaTEX® F Range are ideal for preventing the ingress of fines.

    Coastal & Waterway Engineering

    The hydraulic and filtration properties of the mastaTEX® F range geotextiles make them highly effective in replacing traditional filter layers. The polyester fibre enables the geotextile material to sink underwater, making it easier to install and place on the water bed.

    All options available

    PF14-2-100 mastaTEX® (PET) Non-Woven 14 – 2m x 100m
    PF14-3-100 mastaTEX® (PET) Non-Woven 14 – 2m x 100m
    PF14-4-100 mastaTEX® (PET) Non-Woven 14 – 4m x 100m
    PF14-6-100 mastaTEX® (PET) Non-Woven 14 – 6m x 100m
    PF24-2-200 mastaTEX® (PET) Non-Woven 24 – 2m x 200m
    PF24-3-200 mastaTEX® (PET) Non-Woven 24 – 3m x 200m
    PF24-4-200 mastaTEX® (PET) Non-Woven 24 – 4m x 200m
    PF24-6-200 mastaTEX® (PET) Non-Woven 24 – 6m x 200m
    PF34-2-150 mastaTEX® (PET) Non-Woven 34 – 2m x 150m
    PF34-3-150 mastaTEX® (PET) Non-Woven 34 – 3m x 150m
    PF34-4-150 mastaTEX® (PET) Non-Woven 34 – 4m x 150m
    PF34-6-150 mastaTEX® (PET) Non-Woven 34 – 6m x 150m
    PF44-3-100 mastaTEX® (PET) Non-Woven 44 – 2m x 100m
    PF44-6-100 mastaTEX® (PET) Non-Woven 44 – 6m x 100m
    PF54-6-75 mastaTEX® (PET) Non-Woven 54 – 6m x 75m
    PF64-6-75 mastaTEX® (PET) Non-Woven 64 – 6m x 75m

    Specifications

    Applications

    • Pavement Stabilisation
    • Subgrade/Subsoil Separation
    • Slope Stabilisation
    • Liner protection

    Resources

    Product Spec Sheet

    Download

    Latest Catalogue

    Download

    Geotextile Install Guidelines

    Download

    Description

    mastaTEX® F is a non-woven needle-punched geotextile made from polyester, providing separation, filtration, protection or reinforcement functions in engineering projects. It enhances the performance and design life of granular layers by providing the filtration and separation functions.

    mastaTEX® provides specific advice and recommendations in construction through specialist laboratories and technical support.

    mastaTEX® F Range is manufactured in accordance to ISO 9001:2008.

    Benefits

  • Cost-Effective: mastaTEX® is often the most cost effective solution to engineering problems including cracked roads, weak soil, liquid and gas leaks from landfill sites
  • UV-resistant: the natural UV resistance of polyester ensures the material can withstand the harsh Australian environment
  • Superior Technical Performance: mastaTEX® F range nonwoven geotextiles provide superior technical performance. Due to high levels of elongation, the product will adapt to unforeseeable deformations within the sub-base reducing the risk of damage during installation
  • Polyfabrics can provide specific technical advice and recommendations for mastaTEX® F usage in construction.

    Prevents Intermixing of Granular Materials & Soils

    mastaTEX® F Range geotextiles provide an effective solution when constructing a stable granular layer over soft foundation soils. When stone is placed directly on a soft subgrade, the imposed load often causes intermixing of two layers. This results in contamination of the stone layer and a resulting loss in bearing strength, surface rutting and deformation at the sub-base/subgrade interface.

    Prevents the Ingress of Fines into Drainage Media

    Whether it’s a granular drain or a Geosynthetic alternative such as an open TerraDrain unit, mastaTEX® F Range are ideal for preventing the ingress of fines.

    Coastal & Waterway Engineering

    The hydraulic and filtration properties of the mastaTEX® F range geotextiles make them highly effective in replacing traditional filter layers. The polyester fibre enables the geotextile material to sink underwater, making it easier to install and place on the water bed.

    All options available

    PF14-2-100 mastaTEX® (PET) Non-Woven 14 – 2m x 100m
    PF14-3-100 mastaTEX® (PET) Non-Woven 14 – 2m x 100m
    PF14-4-100 mastaTEX® (PET) Non-Woven 14 – 4m x 100m
    PF14-6-100 mastaTEX® (PET) Non-Woven 14 – 6m x 100m
    PF24-2-200 mastaTEX® (PET) Non-Woven 24 – 2m x 200m
    PF24-3-200 mastaTEX® (PET) Non-Woven 24 – 3m x 200m
    PF24-4-200 mastaTEX® (PET) Non-Woven 24 – 4m x 200m
    PF24-6-200 mastaTEX® (PET) Non-Woven 24 – 6m x 200m
    PF34-2-150 mastaTEX® (PET) Non-Woven 34 – 2m x 150m
    PF34-3-150 mastaTEX® (PET) Non-Woven 34 – 3m x 150m
    PF34-4-150 mastaTEX® (PET) Non-Woven 34 – 4m x 150m
    PF34-6-150 mastaTEX® (PET) Non-Woven 34 – 6m x 150m
    PF44-3-100 mastaTEX® (PET) Non-Woven 44 – 2m x 100m
    PF44-6-100 mastaTEX® (PET) Non-Woven 44 – 6m x 100m
    PF54-6-75 mastaTEX® (PET) Non-Woven 54 – 6m x 75m
    PF64-6-75 mastaTEX® (PET) Non-Woven 64 – 6m x 75m

    Meet the Team

    Raymond Chow has been involved with the geosynthetics industry for over 15 years. Graduating with a First Class Honours degree in Civil Engineering at the University of Sydney, Raymond specializes in retaining wall designs, soft ground improvement, channel and slope protection, and on-site storm water management.

    Raymond has been on various technical committees addressing geosynthetics, including testing, specification and durability issues.

    Join our next session by emailing us at technical@polyfabrics.com.au
    The difference and purpose of Flocculants and Coagulants.
    This project involved the construction of a sports pavilion at Whitefriars College, an independent secondary school in Donvale, Victoria.
    Case study on how FastRock net gabion bags were used to fix flood-affected Brisbane boardwalk.

    HDPE Hydroliner®

    Owned and managed by Sydney Water, Johnstons Creek is a concrete stormwater channel constructed in 1898 and one of Sydney’s earliest purpose-built stormwater drains. This project involves the naturalisation of the creek, located near Glebe in Sydney’s inner west.

    HDPE Hydroliner®

    Owned and managed by Sydney Water, Johnstons Creek is a concrete stormwater channel constructed in 1898 and one of Sydney’s earliest purpose-built stormwater drains. This project involves the naturalisation of the creek, located near Glebe in Sydney’s inner west.

    HDPE Hydroliner®

    Owned and managed by Sydney Water, Johnstons Creek is a concrete stormwater channel constructed in 1898 and one of Sydney’s earliest purpose-built stormwater drains. This project involves the naturalisation of the creek, located near Glebe in Sydney’s inner west.

    Product Enquiry